Northumberland Fire Stations

Seahouses Fire Station Site Progress: Up and running

The fire Station at Seahouses took longer to install the internals as the station did not have a 3 phase electricity supply, rather there is a 2 phase supply. As part of our MCS requirements Kensa contact the DNO to ensure the change in loading to the electricity demand will not effect the properties in the vicinity.

Rather than upgrade to a 3 phase supply it was decided to install a 24kW single phase compact twin to perform the heating load, the 24kW compact comes in both single and three phase. This makes the 24kW one of the largest outputting heat pumps able to run on single phase in the UK and ideally suited for rural installation.

A 6kW shoebox heat pump was installed to satisfy the hot water demand and offer extra capacity for the heating if required.

The installation was carried out by Oakes Energy Services and commissioned on 22/9/17.

The installation was handed over to the Fire Service and they already report an improvement in the station.

Kensa will now work with Northumberland County council to register the installation on the Commercial RHI.

This now concludes Kensa’s first phase of works for Northumberland County Council.

  • Northumberland Fire Stations

Project in brief:

  • Three fire stations operated by Northumberland Fire and Rescue Service;
  • Heated by electric night storage heaters which have reached the end of their useful life and need replacing;
  • A Kensa Twin Compact ground source heat pump system installed inside each station;
  • Borehole ground array;
  • Commercial installations qualifying for the Non-Domestic Renewable Heat Incentive;
  • Sequential installations to be completed in Summer 2018.

Read more about the background to this first project between Northumberland County Council and Kensa Heat Pumps here.

Share Button